Share on Google+Share on Google+

VoIP Gateway Software

This page discusses - VoIP Gateway Software

VoIP Gateway Software

  1. OpenRG Software for New VoIP Gateway
    Jungo Software Technologies, Inc., a leading provider of residential gateway software, today announced that its OpenRG? residential gateway software, optimized for the Intel  IXP420 network processor, will provide the core infrastructure for Well Tech's new broadband Voice over Internet Protocol (VoIP) gateway. OpenRG is a complete set of software technologies for residential gateways that enables the delivery of advanced broadband services and simplifies networking for broadband users and service providers. By choosing the combined hardware and software platform of OpenRG on the Intel IXP420 network processor, WellTech, a leading manufacturer of VoIP and computer telephony solutions, has been able to simplify the product development cycle, focus on product customization and bring a high-performance VoIP gateway to market sooner. 
  2. VoIP Software Gateway
    VOCAL Technologies modem/telephony software libraries include the G.723 dual rate speech coder optimized for execution on DSP architectures from leading silicon suppliers. This software is modular and can be executed as a single task under a variety of operating systems or it can executed standalone with its own microkernel. The G.723 speech coder recommendation was developed for use in multimedia platforms, in particular those specified by the H.32x series recommendations. It provides two compressed stream bit rates, 5 1/3k bps and 6.4k bps. The higher bit rate is of greater quality. The coder processes signals with 30 ms frames and has a 7.5 ms look-ahead. Relative to the G.729/G.729A coders, the G.723 speech coders pass DTMF tones through with less distortion. Both the 5 1/3k bps and 6.4k bps rates are mandatory for the encoder and decoder. 
  3. Voiceboard VoIP Gateway Software Library
    Voiceboard Voice over IP (VoIP) Gateway software library is a set of downloadable modules for MediaPro embedded DSP resource board products. The Gateway library implements a standalone VoIP Trunking Gateway by providing call control, call switching, DSP resource management and embedded H.323, MGCP/MEGACO or SIP protocols. The VoIP Gateway software library is a member of the MediaPro product line, a modular series of cPCI and VMEbus telecommunications boards and embedded software. The VoIP Gateway Library provides these features: * Implements H.323/H.245, MGCP/MEGACO and SIP protocol call control functions * MediaPro VoIP DSP software library included * Management and configuration of DSP resources during call negotiation and teardown * Supports multi-host TCP-UDP/IP protocol and failover operation * Integrated CAS, R2 and ISDN signaling * Management and configuration of local TDM connections * Management of IP to PSTN address translation 
  4. Quicknet Upgrades Its Low Cost VoIP Gateway Software
    Quicknet Technologies, Inc. introduced version 2.0 of its MicroTelco Gateway voice over IP software, providing SOHOs, SMEs, and VoIP resellers more robust features and everyday saving opportunities. PBX-Call-Through offers businesses the ability to connect their PBX to the Internet while making zero change to their PBX configuration or having to retrain PBX users. With no changes to the PBX configuration and no additional training to users, MicroTelco Gateway is a low cost, money saving solution in today's telecommunication market both in the U.S. and overseas. The PBX-Call-Through feature handles voice and fax calls by automatically Least Cost Routing all outgoing long distance and international calls via the Internet-selecting the lowest rate per minute by destination. Local calls are delivered locally and inbound calls are undisturbed.
  5. Cisco Multiservice IP-to- IP Gateway Software
    The Cisco Multiservice IP-to-IP Gateway facilitates simple and cost-effective connectivity between independent voice-over-IP (VoIP) and video networks. Designed to meet enterprise and service provider Session Border Controller (SBC) needs, the Cisco Multiservice IP-to-IP Gateway is an integrated Cisco IOS Software application . The Cisco Multiservice IP-to-IP Gateway provides a network-to-network interface point for:
    * Signaling interworking  H.323, Session Initiation Protocol 
    * Media interworking (dual tone multifrequency [DTMF], fax, modem, and codec transcoding)
    * Address and port translations (privacy and topology hiding)
    * Billing and call detail record (CDR) normalization
    * Quality of service (QoS) and bandwidth management



Posted on: April 18, 2011 If you enjoyed this post then why not add us on Google+? Add us to your Circles

Share this Tutorial Follow us on Twitter, or add us on Facebook or Google Plus to keep you updated with the recent trends of Java and other open source platforms.

Discuss: VoIP Gateway Software  

Post your Comment

Your Name (*) :
Your Email :
Subject (*):
Your Comment (*):
  Reload Image