Article: Mopar A-Body Small Block Head Removal
|
|
|
|
|
Mopar A-Body Small Block Head Removal
The Mopar (Dodge/Chrysler/Plymouth) A-Body (Dart, Duster, Demon, Scamp, etc) engine compartment is rather small. A lot of the work to be done to an engine that is installed takes some tricky manuvering, or shifting the engine around.
I recently purchased a new set of heads for the 360 that's installed in my Duster. I wanted to remove the old heads without pulling the engine, and found that it was a little complicated. Here's the sequence to follow to complete this task:
1. Disconnect battery, or at least the negative side of the battery.
2. Remove the valve covers and associated hoses.
3. Disconnect the exhaust pipes from the manifolds or header collectors.
4. Drain the radiator and block (open the drain plugs on the side of the block). ...
|
|
|
|
|
|
|
Home
|
Back To Articles Directory
|
|
|
Send your comments, Suggestions or
Queries regarding this site at roseindia_net@yahoo.com.
|
|
Copyright © 2006. All rights
reserved.
|
|