Article: Careful Handling Of Non-Friable Asbestos Vinyl Floor Tile And Adhesive Mastic

Careful Handling Of Non-Friable Asbestos Vinyl Floor Tile And Adhesive Mastic

Asbestos tiles are non-friable, but improper removal helps to separate and form corners and break into pieces. Non-friable asbestos tiles and adhesive mastic should be removed using procedures like wet methods and breaking the adhesive bonds by flooding, heating, and using dry ice. In wet method, the removal personnel dissolve the Mastic with a suitable solvent. Thereafter they use a HEPA filter equipped vacuuming device to remove and pick up the resulting slurry.



Breaking Adhesive Bonds of Tiles:



Adhesive bonds help in holding asbestos tiles to the Floors. Flooding floor tile with warm water for a day or two helps easier separation of tiles with a wide blade tool. Electric infrared heater, weed burner, a propane or blowtorch helps scoop up and flip over the t...
 

View Article:
Careful Handling Of Non-Friable Asbestos Vinyl Floor Tile And Adhesive Mastic

Back To Articles Directory Listing Page

Home | Back To Articles Directory

Send your comments, Suggestions or Queries regarding this site at roseindia_net@yahoo.com.

Copyright © 2006. All rights reserved.