Article: Cisco CCNA Certification: Broadcasts, Unicasts, And Multicasts
|
|
|
|
|
Cisco CCNA Certification: Broadcasts, Unicasts, And Multicasts
When you begin your CCNA studies, you get hit with a lot of different networking terms right away that you might not be familiar with. What makes it a little more confusing is that a lot of these terms sound a lot alike. Here, we're going to discuss the differences between broadcasts, multicasts, and unicasts at both the Data Link (Layer 2) and Network (Layer 3) layers of the OSI model.
A broadcast is simply a unit of information that every other device on the segment will receive. A broadcast is indicated by having every bit of the address set to its highest possible value. Since a hexadecimal bit's highest value is "f", a hexadecimal broadcast is ff-ff-ff-ff-ff-ff (or FF-FF-FF-FF-FF-FF, as the upper case does not affect hex value). The CCNA exam will demand you be very fam...
|
|
|
|
|
|
|
Home
|
Back To Articles Directory
|
|
|
Send your comments, Suggestions or
Queries regarding this site at roseindia_net@yahoo.com.
|
|
Copyright © 2006. All rights
reserved.
|
|